Barco CLM HD8 R9050130, Руководство пользователя

Страница: 130 / 197

13. Projector control
Level 1 Level 2 Level 3
AUTO [auto image menu]
Overtemp DMD safety [ON]
Menu position
Menu [Center]
Bar scale [Bottom]
Local LCD contrast
13.2 Projector address
Overview
• Individual projector address
• Common address
13.2.1 Individual projector address
About individual projector address
Before a projector, and only this projector, can be controlled via a remote control, an individual address must be entered in the
projector.
This individual projector address can then be used to control the projector via remote control or via a serial connection.
Next to an individual projector address, each projector has also a common address for group control.
How to set an individual address?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select
Projector control
and press ENTER .
3. Use the ▲ or ▼ key to select
Projector address
and press ENTER .
4. Use the ▲ or ▼ key to select
Projector Address
and press ENTER .
The edit projector address window opens.
5. Use the ▲ or ▼ key to select a new value
Or,
enter a new value with the digit keys on the remote control or local keypad.
6. Use the ◄ or ► key to select the next digit and repeat step 5.
7. When the desired address is entered, press ENTER to store that address.
Image 13-1
Image 13-2
Image 13-3
126 R59770057 CLM HD8 16/07/2007