Barco CLM HD8 R9050130, Руководство пользователя, Страница: 131 / 197

13. Projector control
Image 13-4
13.2.2 Common address
About common address
A common address can be ’0’ or ’1’.
Any command coming from a remote control programmed with that common address will be executed.
How to change the common address?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select
Projector control
and press ENTER .
3. Use the ▲ or ▼ key to select
Projector address
and press ENTER .
4. Use the ▲ or ▼ key to select
Common address
and press ENTER .
The edit common address window opens.
5. Use the ▲ or ▼ key to select ’0’ or ’1’
Or,
enter ’0’ or ’1’ with the digit keys on the remote control or local keypad.
6. When the desired address is entered, press ENTER to store that address.
Image 13-5
Image 13-6
Image 13-7
Image 13-8
13.3 Serial communication
Overview
• Baud rate setup
• Interface standard
• RS422 termination
R59770057 CLM HD8 16/07/2007 127