Barco ClickShare CX-20 Gen2, Руководство пользователя

Страница: 43 / 66

43 R5900114 /01 ClickShare CX-20 Gen2
Problem Cause Solution
The display does not recognize or
is not able to display the Base Unit
output resolution. You or an administrator should
change the corresponding setting
via the web interface.
The Base Unit is in standby mode. Briefly push the standby button on
the Base Unit or plug in a Button
and run the ClickShare client
software.
The Base Unit is powered off. Check if power adapter is
connected to the Base unit and to
the wall outlet.
Wallpaper is disabled If you connect a Button and start
sharing, the content should be
shown.
After inserting the Button into your
laptop, you cannot find the
ClickShare drive. No automatic refresh of drives. Refresh the view on your laptop.
Bad connection at USB port on
laptop.
• Reconnect to the USB port.
• Try another USB port.
• Reboot your laptop.
Windows tries to assign the
ClickShare drive to an already
reserved drive letter Use Microsoft Windows Disk
Management to assign it to a free
drive letter.
IT policy not mount USB drives Contact your IT responsible.
Some programs of Windows are
not shown on the display. Use of overlays, 3D or hardware
acceleration in the GPU.
• Disable overlays or hardware
acceleration in the GPU.
• Disable AeroGlass in Windows
7
• Capture mode
Issues related to first time use and updating
Problem Cause Solution
Ethernet cable is inserted, but the
Base Unit does not receive an IP
address Fixed IP address not configured.
802.X authentication required Contact your IT responsible
Update server not reachable Proxy server to be configured.
Firewall is blocking the connection Contact your IT responsible
Buttons do not connect after first
time installation Buttons not paired Please pair the Buttons by
plugging them into the USB ports
of the Base Unit. Manual pairing
only needs to be done once, after
this, the Buttons will be
automatically updated when
updating the Base Unit
Unable to connect to internet No internet available at the
customer’s site Contact your IT responsible
Issues related to screen sharing (video/screen sharing)
Problem Cause Solution
After inserting the Button into your
laptop, you cannot find the
ClickShare drive. Bad connection at USB port on
laptop Reconnect to the USB port, try
another USB port, or reboot your
laptop.
Troubleshooting