Barco ClickShare CSE-200, Руководство по установке

Страница: 73 / 85

6. CSE-200 Configurator
When new fi rmware is available, this fi rmware will be loaded and the Base Unit will reboot.
Manual fi rmware update
1. Download the latest version of the software from Barco’s website.
2. Log in to the Con fi gurator .
3. Click Support & Updates → Firmware .
4. To upload a fi rmware version, click on Upload fi rmware.. .
A browser window opens.
5. Browse to the fi le with the new software and click Open to start the upload.
Note: This should be an nad fi le. You might have to unzip the fi le downloaded from Barco’s website.
Note: Updating the software to the Base Unit takes several minutes. Progress can be followed on the meeting room display.
The Base Unit software is updated.
If a fi rmware downgrade is allowed on the Base Unit, check the check box in front of Allow fi rmware down-
grade .
6.28 Support & Updates, Troubleshoot, log settings
About logging
Both Button and Base Unit log data is saved in log fi les on the Base Unit. These log fi les can contain debugging information. They
can be downloaded on a local computer and cleared on the Base Unit. Debug logging covers only a few hours before it will be
overwritten. Therefore, it is important if you discover a problem with your system to download the logging immediately.
How to use
1. Log in to the Con fi gurator .
2. Click Support & Updates → Troubleshoot .
Image 6-45
Troubleshoot, logging
3. To create a debug log, check the check box next to Enable debug logging .
4. Reproduce the issue you want to report.
5. To download the current log fi le, click on Download logs .
6. To clear the current log fi le, click Clear logs .
7. To enable logging by the ClickShare client (6):
R5900023 CLICKSHARE CSE-200 13/07/2016 61