Barco ClickShare CSE-200, Руководство пользователя

Страница: 26 / 50

R5900025 /08 ClickShare CSE-200 26
LEDs behavior Explanation
• software update of the Base Unit
breathing white • ECO standby mode
static white • awake and ready (i.e. showing the welcome message on the
display)
• pairing is done
red blinking • an error occurred
dark • deep standby/off
Power button
The button at the front of the Base Unit has a standby function once the Base unit is powered.
• When the system is in normal operational mode, a push makes the system goes into a pre-defined standby
mode.
• When the system is in standby, a push triggers the system to start up and it goes into normal operational
mode.
Bluetooth
Bluetooth functionality is currently not available and Bluetooth signal is disabled.
2.3 About the Button
Button functionality
A Button contains three main functional components.
1 2 3
Image 2-3: The Button
1 USB connector
2 Button
3 LED ring
Handle the Button cable with care. Rough handling might cause defects.
USB connector
Using the USB connector the Button can be plugged into a laptop (for sharing your screen) or the Base Unit
(for pairing the Button to the Base Unit or updating its software). Button R9861500D1 has a USB Type-A
connector, Button R9861500D1C has a USB Type-C
TM connector. Depending on the type of USB port on your
laptop or on the Base Unit a convertor must be use.
Introduction to CSE-200