Barco CINE7 R9010040, Руководство пользователя

Страница: 24 / 115

3. Source Connections
3.9 Communication Port for Communication With Peripherals
Connecting a RCVDS 05 switcher to the projector
• Up to 10 inputs (20 inputs when video and S-video) with the RCVDS 05 switcher (R9827880) and up to 90 inputs when 10
RCVDS switchers are linked via the 5-cable output modules.
• Serial communication with the projector.
• Remote control buttons on the RCVDS to control the projector (source selection and analog settings).
• The selected source number will be displayed on a 2 digit display and the selected input modules will be indicated with a LED
on the rear.
Connecting a VS05 switcher to the projector
The VS05 can switch up to 5 Composite Video sources, 3 S-Video Sources and 1 RGB analog or component Video source to the
projector. In addition, the audio signal proper to the source, can be switched to an audio amplifier. Order number : R9827890.
Connecting an IR Remote Receiver to the projector
This infrared receiver unit makes it possible to control the projector from another room. There is a communication line cable between
the IR receiver and the projector or the RCVDS. The control information from the RCU can now be sent to the IR Remote Receiver.
The IR Remote Receiver displays the selected source on a 7-segment display.
3.10 12V Trigger output
What can be done?
12 V output voltage to trigger external equipment such as screen up/down, curtains open/close etc.
This voltage is available when the projector switches from standby to operational mode.
When the projector returns into standby mode, the 12V trigger voltage disappears too.
Image 3-15
20 R5976584 BARCO CINE7 26022003