Barco cDR+67-D Скачать руководство пользователя страница 2

Страница: 2 / 16

Based upon years of experience and focused development, Barco Control Rooms has

developed the ultimate display wall for the control room environment. The O

VER

IEW

series of display walls is designed to emphasis not only performance, but long-term

reliability and ease of maintenance.

Barco has developed the O

VER

IEW

D series projection modules to provide key features to

enhance the operator’s comfort within a 24/7 environment. By including Barco’s

proprietary "Optical Dimming" and "Dynamic Feedback" technology, the O

VER

IEW

D series

projection module will allow constant optimization of brightness and contrast

performance while maintaining excellent color. By maintaining technological ownership of

the entire projection module, Barco Control Rooms was able to design the O

VER

IEW

Series with the most rugged components available.

Finally, the O

VER

IEW

D Series affords the customer piece of mind with a system that not

only provides you with the ultimate in performance, but also provides unsurpassed

reliability and ease of maintenance. Barco backs these ideas with long-term product

support and a wide range of specialized customer services.

Содержание cDR+67-D

















Результаты поиска

Содержание cDR+67-D

Отзывы:

Похожие инструкции для cDR+67-D

Бренды по названию

Популярные бренды

Barco cDR+67-D, Брошюра

Результаты поиска

Содержание cDR+67-D

Отзывы:

Похожие инструкции для cDR+67-D

Бренды по названию

Популярные бренды