Barco C-10, Руководство по установке

Страница: 46 / 132

R5900103 /02 C-10, C-5 46
Sender/Receiver
CX range
SNMP UDP 161 and 162
REST API TCP 4003
4.6 Network connected setup
Overview
This is the simplest installation which offers a seamless experience for employees and is the recommended
setup for temporary setups, visitors' centers, small to medium installations without network integration needs,
for internal meeting rooms, for companies with a flat network topology or when the ClickShare Button will be
the main way for people to the system.
In this default mode, (optional) ClickShare Button and Base Unit operate directly out of the box (Button must
be paired to the Base Unit before it can be used) and users can share to the Base Unit with the ClickShare
Desktop App, the ClickShare Mobile App, AirPlay, Google Cast via the network to which the Base Unit is
connected without losing the internet connectivity. Sharing via Miracast depends on the configuration of the
device.
Using a ClickShare Button allows guests to stay connected to the Guest LAN and thus retain internet
connectivity. Guest mobile devices will usually need to connect to the Base Unit directly and will only be able
to access the internet if the device supports to use data (3G/4G) at the same time.
Image 4 – 6 Image 4 – 7
4.7 Dedicated network setup
Overview
This installation offers an isolated network setup where all connections from and to the Base Units can be
controlled. This dedicated AV (or ClickShare) network or VLAN can be used for more fine-grained access
control, to ensure no connection can happen between any of the connected physical or virtual LANs or to
separate all ClickShare traffic from all other IP traffic to ensure business requirements in terms of bandwidth,
security and latency.
In this setup, the configurations can widely differ depending on network topology and security requirements in
the organization. Here, we will describe a simple setup where the Base Unit is placed in a dedicated AV VLAN,
a commonly used practice within organizations.
In this setup, ClickShare Buttons and Base Unit operate directly out of the box (Buttons must be paired to the
Base Unit before they can be used)). Since the Base Unit has been installed in a dedicated network, firewall
configuration will be required to enable the use of the ClickShare Desktop App, the ClickShare Mobile App,
AirPlay and Google Cast over the network
If the firewall is not configured to allow connections from either the guest Wi-Fi or the employee Wi-Fi, users
can connect to the wireless access point of the Base Unit to share with the ClickShare Desktop App,
ClickShare Mobile App, AirPlay and Chromecast and will only be able to access the internet if the device
supports to use data (3G/4G/5G) at the same time. Note that this requires that the Base Unit
’ s access point is
C-10, C-5 Installation