14
BlendPRO-II • User’s Guide
NK==fåíêçÇìÅíáçå
Connectivity Diagram
`çååÉÅíáîáíó=aá~Öê~ã
The figure below illustrates a sample connectivity diagram:
Figure 1-1.
Typical BlendPRO-II Application (sample)
Please note the following points regarding the system:
•
The maximum system configuration of four ScreenPRO-II units is shown.
•
Ethernet connects the BlendPRO-II to all ScreenPRO-II units and the
ScreenPRO-II Controller, via a network switch.
•
DVI signals connect the ScreenPRO-II outputs to BlendPRO-II, and the
BlendPRO-II to each projector input.
•
Analog connectivity from each ScreenPRO-II is used for monitoring.
•
The
Widescreen Lock
output from BlendPRO-II is used to lock each
ScreenPRO-II system. These connections are required.
ScreenPRO-II ID #1
ScreenPRO-II Controller
BlendPRO-II
Switch
X4 Widescreen Blend
Preview 1
Preview 2
Preview 3
Preview 4
Program 1
Program 2
Program 3
Program 4
ScreenPRO-II ID #2
ScreenPRO-II ID #3
ScreenPRO-II ID #4
Ethernet
DVI In
DVI Out or
Analog Out
Analog
Analog
Widescreen Lock
(Required)
Genlock In
(Optional)
