Barco BarcoSLM G10 Performer, Руководство пользователя

Страница: 102 / 135

8. Installation Mode
Options
The zoom/focus and shift can be set the same for all files.
1. Push the cursor key
↑ or ↓ to highlight Options . (menu 8-28)
2. Press ENTER to select.
The Lens Options menu will be displayed. (menu 8-29)
3. Press ENTER to toggle between ’Yes’ or ’No’.
[Yes]
all lens settings will be the same for all files
[No] different lens settings for all files
Default setting : [Yes]
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-28
LENS OPTIONS
Use the same
zoom and focus
of the lens
for all files?
[No]
<ENTER> to toggle
<EXIT> to return.
Menu 8-29
When in the ’No’ position, the lens memory is using incremental motors which have an accuracy of 1 to 2
steps. This has no implication for zoom, but focus might demand some fine-tuning when switching from one
source to another.
8.10 Quick Access Keys
What can be done?
It is possible to get an overview of the programmed functions of the different function keys (only accessible with an adapted RCU).
How to get an overview.
1. Push the cursor key ↑ or ↓ to highlight Quick Access Keys . (menu 8-30)
2. Press ENTER to select.
The Quick Access Overview menu will be displayed. (menu 8-31)
<*> starts up the lens adjustment functions
<0> 0 keys is used as prefix when selecting a PiP source. E.g. 0 + 2 will select source 2 as PiP source while only 2 will select
source 2 as main source.
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with
↑
or
↓
then <ENTER>
<EXIT> to return
Menu 8-30
QUICK ACCESS KEYS
<F1> :
<F2> :
<F3> :
<F4> :
<F5> :
<*> : LENS ADJUSTMENTS
<0> : PiP SOURCE
CLEAR ALL
Select with
↑
or
↓
then <ENTER>
<EXIT> to return.
Menu 8-31
No functions are preprogrammed.
98 R5976562 BARCOSLM G10 PERFORMER 20/10/2004