R5976255
A
TLAS
CS4 (2001-03)
8-9
To adjust
Custom Balance
, handle as follows:
!
Push the cursor key
up
or
down
to highlight
'Custom Balance'
.
!
Press
ENTER
to select.
!
Push the cursor key
up
or
down
to adjust red and push the cursor key left or right to adjust blue
(range 0 to 2.5) in comparison with the green color (value 1).
8.2.3 Gamma
With the
gamma correction adjustment
, it is possible to accurately set the
gamma
of the projector
image.
To change the gamma value :
!
Push the cursor key
up
or
down
to highlight
'Gamma'
.
!
Press
ENTER
to select.
!
Change the
gamma
value by pushing the cursor key left or right until the desired value is
reached.
!
Press
EXIT
to return to the
Picture Tuning menu
.
8.2.4 Decoding EBU/IRE
Only for NTSC signals.
The possibility is offered to decode the NTSC video signals via the default American IRE standard
or via the European EBU standard. Decoding a NTSC signal using the European EBU standard
may result in a greenish tint.
!
Push the cursor key
up
or
down
to highlight
'Decoding'
.
!
Press
ENTER
to toggle between
EBU
or
IRE
.
!
Press
EXIT
to return.
8.2.5 Dynamic Color Depth
Increases color contrast for all video and data sources.
To change the dynamic color depth value:
!
Push the cursor key
up
or
down
to highlight
'Dynamic Color Depth'
.
!
Press
ENTER
to select.
!
Change the value by pushing the cursor key
left
or
right
until the desired color contrast is
reached: Adjustment range: 0 ... 8; default: 4
!
Press
EXIT
to return to the
Picture Tuning menu
.
8.2.6 Noise Reduction
Reduces noise and pixel jitter in all video and data sources.
To change the noise reduction value :
!
Push the cursor key
up
or
down
to highlight
'Noise Reduction'.
!
Press
ENTER
to select.
!
Change the value by pushing the cursor key
left
or
right
until the desired noise level is reached.
Adjustment range: 0 ... 8
!
Press
EXIT
to return to the
Picture Tuning menu
.
