Barco 70, Руководство по установке

Страница: 41 / 91

7. Image Settings menu
How to change the saturation ?
1. Push the cursor key ↑ or ↓ to highlight
Saturation
. (menu 7-5)
2. Press ENTER to select.
A slider box appears.
3. Use the cursor keys to adjust the saturation setting.
↑ or → key for richer colors (higher values).
↓ or ← key for lighter colors (lower values).
Image settings
Brightness
Contrast
Saturation
Tint
Sharpness
Gamma
Color temperature
White peak Off
Back
Menu 7-5
7.6 Tint (hue)
About tint
The tint function is used to adjust color hue to obtain true color reproduction and is only active for 60 Hz sources like NTSC signals.
For PAL and SECAM sources, the tint is greyed out.
NTSC
National television system committee. The organization that developed the analog television standard currently in use
in the U.S., Canada, and Japan. Now generally used to refer to that standard. The NTSC standard combines blue,
red, and green signals modulated as an AM signal with an FM signal for audio.
PAL
Phase alternate line. The television broadcast standard throughout Europe (except in France and Eastern Europe,
where SECAM is the standard). This standard broadcasts 625 lines of resolution, nearly 20 percent more than the
U.S. standard, NTSC, of 525.
SECAM
Sequential couleur avec mémoire. The television broadcast standard in France, the Middle East, and most of Eastern
Europe, SECAM provides for sequential color transmission and storage in the receiver. The signals used to transmit
the color are not transmitted simultaneously but sequentially line for line. SECAM processes 625 lines, a maximum
of 833 pixels per line and 50 Hz picture frequency. SECAM is used as a transmission standard and not a production
standard (PAL is typically used).
R5976763 CINEVERSUM 60/70 22042004 37