17
Troubleshooting
Pre-print coat takes a long time to dry.
Apply only a thin layer of pre-print polish.
Pre-print coat gets ripples in it if I blow
on it.
For best results, let the polish air dry. Don’t blow on it.
Left to right “streaks” in the design.
In Settings, click Printer Settings, then click Clean
Cartridge. If streaks still appear, remove the ink
cartridge from the printer (see page. 6). Using a
cotton swab
(not included)
, carefully clean the ink
jets on the underside of the cartridge. Reinstall the
ink cartridge.
The design is printing on my skin, outside
of the nail.
Use the sizing tool to scale the image to your nail.
When printing, make sure to align your nail directly
under the design in the design window.
After applying top coat and letting dry completely,
wash your hands with soap and warm water to
remove any ink from your skin
The printed design “bleeds”.
Use less pre-print coat.
Image doesn’t cover the entire length of
my nail.
Maximum image length is 0.56”. Be creative! Center
the design in the middle of your nail. Leave tip
white for a French-style manicure. Try printing two
images, layering them for a cool effect!
Out of focus image in design window.
Open top cover of printer. Camera lens is under
camera cover; lens is black. Rotate lens to adjust
focus. You will see focus adjustment in design
window.
The design is scratched by the brush
when I apply the top coat.
Apply more top coat to the brush. A thicker coat
helps keep the design intact.
The designs are hard to remove from my
nails.
For best results, use nail polish remover (not
included). Wash with soap and warm water.
The printer ink has stained my skin or
nails.
1. Soak the stained area in a solution of hydrogen
peroxide for 1-2 minutes (commercially available
3%).
2. Wash the stained area with light-duty liquid hand
soap in warm water, then rinse thoroughly.
Repeat
steps 1 and 2 as necessary. Repeat these steps as
necessary.
Using a base coat, like the provided WHITE POLISH,
will prevent your nails from being stained.
PROBLEM
SOLUTION
