14
IMPORTANT
:
Make sure white polish is applied prior to printing the design.
Ink staining may occur on the fingernail if white polish is not applied.
NOTE:
your own colored polish may also be used instead of white polish.
PRE-PRINT POLISH:
Apply a thin coat of pre-print coat to your fingernail. Allow
to dry
completely
.
TOP COAT:
Give the design a few seconds to dry, then apply top coat if you
want to keep the design. Allow 5 minutes for top coat to dry. The nail design
washes off easily with soap and water if it is still wet, but if it has dried use nail
polish remover
(not included)
.
IMPORTANT
:
Do not print designs on acrylic nails.
Helpful Tips
To order refills of the pre-print coat, top coat and white polishes or replacement
ink cartridges, please order on the website or call the telephone number.
service.mattel.com 1-888-892-6123
NOTE: Specially formulated Pre-Print Coat and Nail Ink Cartridge are available through
Mattel only. Refills available while supplies last.
Refill Orders
