26
Replacing The Hoses
If there are any signs of wear or cracking in the barbeque hose, you will need to replace it immediately.
Ensure you replace it with a hose and regulator purchased from Barbeques Galore to ensure proper gas
connection compatibility.
Connect the nut of the hose to the gas inlet on the barbeque or the side burner, whichever applies in your case. You
MUST use two spanners to tighten it properly. Do not use sealing tape. The connection is designed to seal properly
without it. Perform a leak test as explained in the see "Installation" section before using.
Maintenance (cont)
