STEP 1
- Place Right Trolley Brace (8a) and Left Trolley Brace (8b) and Front Brace (7a) and Rear Brace (7b)
upside down on a flat surface aligning the holes.
STEP 2
- Align the holes in the 2 x Back Legs with axle holes (9a & 9b) with the outside of the upside down Braces
(7a, 7b, 8a, 8b) and fix each leg in place using 4 x Bolts (B), 4 x Washers (D) and 4 x Nuts (C) per leg.
Don’t fully tighten yet.
STEP 3
- Align the holes in the 2 x Front Legs (6a & 6b) with the outside of the upside down Braces (7a, 7b, 8a,
8b) and fix each leg in place using 3 x Bolts (B), 3 x Washers (D) and 3 x Nuts (C) per leg.
Don’t fully tighten yet.
STEP 4
- Attach Handle (10) to the front of the assembled trolley in the remaining holes on the front of the frame
and fix using 2 x Nuts (C) and 2 x Washers (D) to the pre attached bolts on the handle.
STEP 5
- Insert the Axle (11) into the holes on the Back Legs (9a & 9b) and feed the two Wheels (12) onto the Axle
and fix 1 x Washer and Nut set (F) to each end of the Axle (11). Check that all nuts and bolts are
tightened firmly.
STEP 6
- Now turn the Trolley the right way up and with help, carefully lift and attach the Oven (3) onto the assem
bled Trolley and fix underneath using 4 x Bolts (G) and 4 x Washers (E).
STEP 7
- Insert the Side Shelves (5) into the slots on the Legs (6) and (9).
STEP 8
- Attach the Chimney Cap (1) to the Chimney (2) using 3 x Bolts (A).
STEP 9 - To insert the chimney (2) on top of the pizza oven (3) place it down in to the pre-attached collar (13).
Holding the chimney still and in an upright position begin to tighten each of the grub screws found in the
side of the collar with the Allen key provided. Take care not to tighten one fully before moving on to the
next, as this could push the chimney out of line. Instead tighten each grub screw gently and work your
way around until all are tight and the chimney remains vertical.
STEP 10
- Place the Door (4) into the Oven (3). Re-check that all nuts and bolts are tightened firmly.
The Oven is now ready to use. Please ensure you thoroughly read this manual prior to use.
6
Assembly diagram
3
1
2
A
12
F
9b
9a
G
E
11
5
4
8
C
D
7
6b
6a
B
10
7b
