Barbeques Galore ALFRESCO BG2294B-G, Инструкция по сборке и эксплуатации

Страница: 18 / 26

Page 18
Checking for gas leaks and lighting the bbq (continued)
LIGHTING THE BURNERS
After confirming there are no leaks:
1. Open the lid of the range unit while lighting either burner.
2. Turn all the control knobs clockwise to
“OFF” position.
3. Connect the regulator to the gas cylinder. Turn the gas supply “ON” at the gas cylinder.
4. Push IN either burner control knob and keep pressing IN whilst turning anti-clockwise to
the
“ HIGH” position (a clicking sound is heard). This should light that burner. Observe
if the burner is lit, if the burner is not lit, repeat this step once.
5. If the burner has not lit after retrying once, turn the control knob “OFF” (clockwise) wait
five minutes and repeat step 4.
6. If the burner still does not light, light the appliance with a lit match held next to the burner.
Consult your store of purchase if necessary to service the ignition.
Warning: If the burner completely fails to ignite, turn the control knob “OFF” (clockwise)
and also turn the cylinder valve “OFF”. Wait five minutes before attempting to relight with
ignition sequence from Step 1.
CONTROLLING THE FLAMES
Adjust the heat by turning the knob between the “ HIGH” and “LOW” positions.
Light individual burners in the same way as above.
To turn the range unit “
OFF” , turn the cylinder valve or regulator switch to the “ OFF”
position and then turn both the control knobs on the appliance clockwise to the “OFF”
position.
NEVER CLOSE THE LID WHILE THE BURNER IS ON OR HOT!