Barbecook 223.5912.000, Руководство пользователя

Страница: 7 / 58

www.barbecook.com 7
2
You can also clean these components by hand, using a
soft sponge or cloth and a regular detergent.
1
Never use acid, white spirit or other flammable products
to clean the appliance.
8.2 Cleaning the grill
We recommend cleaning the grill after each use, with the
Barbecook cleaner. Proceed as follows:
1
Let the grill cool down completely.
2
Spray the foam on the grill and let it act for a while.
The foam discolours, as it soaks off the dirt and greases.
3
Remove the foam with a soft sponge and water and rinse the
grill thoroughly.
4
Dry the grill well and store it in a dry place. This prevents
formation of rust.
2
You can also put the grill in the dishwasher or clean it with
a soft detergent or with sodium bicarbonate. Never use
oven cleaners on the grill.
8.3 Storing the appliance
•
Store the appliance indoors after each use.
•
To extend the lifespan of your appliance, we recommend
putting it in the bag that came with the appliance.
•
Make sure the appliance is completely dry before you store
it. This prevents formation of rust.
•
Remove the batteries before you store the appliance.
2
If you want to store the appliance vertically, you have to
fix the base plate and the charcoal container. You can do
this with the styrofoam blocks and the two elastic straps
that came with the appliance.
8.4 Disposing batteries
Always dispose used batteries in a safe way, according to the
local prescriptions. Never put used batteries in the garbage.
8.5 Maintaining enamel and stainless
steel
The appliance is composed of enamelled and stainless steel
parts. Each material has to be maintained differently:
1
To prevent formation of rust on stainless steel, avoid
contact with chlorine, salt and iron. We recommend not
using the appliance near the coast, near railways or near
swimming pools.
1
Damages caused by not following these instructions are
regarded as inadequate maintenance and are not
covered by the warranty.
Below the exploded view of your appliance (second part of the
manual), you find a list with all parts of which the appliance is
composed. This list includes a symbol that specifies the material
of each part, so you can use it to check how you have to maintain
a particular part. The parts list uses the following symbols:
8.6 Ordering spare parts
Parts that are directly exposed to fire or intense heat have to be
replaced from time to time. To order a spare part:
1
Look up the reference number of the part you need. You find
a list of all reference numbers below the exploded views in
the second part of this manual and on www.barbecook.com .
2
If you registered your appliance online, you will
automatically be guided to the correct list.
2
Order the spare part at your point of sale. You can order
parts both under and outside warranty.
9 WARRANTY
9.1 Covered
Your appliance comes with a warranty of two years, starting from
the date of purchase. This warranty covers all manufacturing
defects, provided that:
•
You used, assembled and maintained your appliance
according to the instructions in this manual. Damages
caused by misuse, incorrect assembly or inadequate
maintenance are not regarded as manufacturing defects.
•
You can present the receipt and the unique serial number of
your appliance. This serial number starts with a letter,
followed by 15 digits. You can find this number:
-
On this manual.
-
On the packaging of the appliance.
-
On the bottom of the appliance.
•
The Barbecook quality department confirms that the parts
are defective and that they proved defective under normal
use, correct assembly and adequate maintenance.
If one of the above conditions is not met, you cannot claim any
form of contribution. In all cases, the warranty is limited to the
repair or replacement of the defective part(s).
9.2 Not covered
The following damages and defects are not covered by the
warranty:
•
Normal wear and tear (rusting, distortion, discolouration...) of
parts that are directly exposed to fire or intense heat. It is
normal to replace these parts from time to time.
•
Visual irregularities that are inherent to the manufacturing
process. These irregularities are not regarded as
manufacturing defects.
•
All damages caused by inadequate maintenance, incorrect
storage, improper assembly or modifications made to
pre-assembled parts.
•
All consequential damages caused by careless or
non-compliant use of the appliance.
•
Rust or discolouration caused by external influences, the use
of aggressive detergents, exposure to chlorine... These
damages are not regarded as manufacturing defects.
Material How to maintain this material
Enamel •
Do not use sharp objects and do not knock
against a hard surface.
•
Avoid contact with cold liquids while still hot.
•
You can use metal sponges and abrasive
detergents.
Stainless steel •
Do not use aggressive, abrasive or metal
detergents.
•
Use soft detergents and let them act on the
steel.
•
Use a soft sponge or cloth.
•
Rinse thoroughly after cleaning and dry well
before storing.
Symbol Material
Enamel
Stainless steel