barbas UNILUX-6 40, Инструкция по эксплуатации и техническому обслуживанию

Страница: 18 / 32

18
UNILUX-6 40
Instructions for use
To reduce the chance of accidental escape
of smoke, it is strongly adviced to follow
the fi ring instruction as stated in 5.2.
5.5 CLEANING THE WINDOW
After several burning hours, a light deposit may form on the inner side of the window.
Once the appliance has cooled down, this deposit can be removed using glass cleaner
or ceramic hob cleaner.
5.6 INCREASE THE FLUE DRAUGHT
Attention: Not possible if the appliance is equipped with a 45 degrees chimney
connection.
If there is too much fl ow resistance in the chimney, causing insuffi cent fl ow of of the fl ue
gasses, one can increase the chimney draught.
To do this, remove the upper baffl e from the appliance and detach the back part of the
baffl e by moving this part back and forth until it breaks. (see fi gures hereunder)
Subsequently, replace the baffl e in the appliance.
Your appliance is at its most economical when :
• Using dry and clean wood (as described further in Chapter 6).
• Always ensure even combustion. Stoke with the primary air regulator closed.
To do this, place the combustion air supply slider in the centre position.
• The bed of the fi re should be homogeneous, and the fi re must have easy access to
air. Position the blocks of wood (loosely and evenly) horizontally on the bed of ash,
so that they are separate and several centimetres away from the walls.