background image

9

UNILUX-6  40

Installation instructions

•  Ensure that the room in which the appliance is situated has adequate ventilation.

•  Wood and wood briquettes may be stoked in the appliance. 
  Do not use any coal and liquid fuels or fuel gel in the appliance. The appliance is 

not intended for use of this fuels and can be dangerous  and lead to damage to your 
health and may seriously damage the appliance.

• 

Never

 use the appliance to burn rubbish. 

•  Please read all instructions / stickers on and around the appliance. 
 
•  Read the “Directions for use” before using the appliance for the fi rst time. When you 

fi rst fi re up your appliance, there are a number of extra points you should take into 
account.

•  In transit, some parts of the appliance may have moved from their original place. 

Check that the door opens and closes, the baffl e plates are fi tted correctly to the 
brackets at the top of the appliance and the heat-resistant panels are fi xed to the 
walls. Check if there are no foreign objects in the appliance.

•  Avoid over-loading (white burning glow), caused, for example, by lengthy burning 

with primary air (combustion air supply slider all the way to “ 

+

 ”) or by burning too 

much wood in one go. The appliance can then become over-heated.

•  Ask for the local building regulations, before commensing the installation of the 

appliance.

Содержание UNILUX-6 40













































Отзывы: