barbas EVO 80-65, Инструкция по установке и эксплуатации

Страница: 18 / 40

18
EVO 80-65
Installation instructions
2.2.5 Convection air supply and- outlet
Convection air (heating air) is exclusively for the transfer of heat from the appliance to
the living space. This air comes from the room and stays in the room.
• Use convection set:
The function of the convection set (option) is to improve the convection through the
appliance, resulting in effi ciency improvement and preventing high temperatures in
the chimney.
The set consists of : • 3 m alufl ex
• 2 exit grids (white)
• 2 collar adaptors Ø125 mm
• 4 hose clamps
• When assembling the convection set take the following points into consideration:
° Ensure that the fl exible hose connections are gastight. If desired, insulate the
fl exible pipes with heat-insulating material that is resistant to temperatures in
excess of 700°C.
° The air exit grids cannot be fi tted until a few days later, once the masonry has
been pointed and allowed to dry. If one or more channels are connected leading
to other rooms, these rooms must be fi tted with closable grids. These are available
from your dealer, as well as the fl exible hoses and clamps required.
° Within a range of 30 cm either side and 50 cm above the escape opening
(exit grids), there must be no fl ammable materials (e.g. wooden ceiling, fi tted
furniture).
° The convection casing of the built-in fi re must be covered all around with a
10-cm thick layer of insulation (use of ceramic wool is permitted).
2.2.6 Convection fan set
The heat transfer can be increased by transporting the heat with the convection fan box
(optional). With this system, hot air is blown into the room.
The convector fan built into the box is regulated by a built-in dimmer, with an integrated
on/off switch.
The fan doesn’t have any automatic regulation based on the appliance temperature.
If on purchasing the appliance the optional convection fan set has been opted for, this
will have been pre-fi tted.