background image

Warnings, Installations and Operations 

 

This gas appliance must be installed by a qualified installer in accordance with local building codes, or in the absence of 

local codes, with the current CAN/CSA-B149.1 or .2 Installation Code (in Canada) or the current National Fuel Gas Code 

Z223.1- NFPA 54 when installed in the United States. 

This appliance, when installed, must be electrically connected and grounded in accordance with local codes, or in the 

absence of local codes, with the current CSA C22.1 Canadian Electrical Code or with the National Electrical Code; 

ANSI/NFPA 70 when installed in the United States. 

 

 

WARNING

 

FOR SAFE INSTALLATION AND OPERATION OF YOUR GAS FIREPLACE PLEASE NOTE THE FOLLOWING: 

1. 

when an appliance is for connection to a fixed piping system, the installation must conform with local codes or, 

in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1 • NFPA 54; National Fuel Gas 

Code; Natural Gas and Propane Installation Code, CSA B149.1; or Propane Storage and Handling Code, CSA 

B149.2, as applicable. 

2. 

This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence 

of local codes, with the National Electrical Code, ANSI/NFPA 70; or the Canadian Electrical Code, CSA C22.1, 

if applicable. 

3. 

THIS UNIT IS NOT FOR USE WITH SOLID FUEL. 

4. 

Always keep the appliance clear and free from combustible materials, gasoline, and other flammable vapors 

and liquids. 

5. 

Inspect the fuel supply connection (including the hose for LP models) before each use of the appliance. See 

Lighting Instructions for removal of Access Panel. 

6. 

If it is evident there is excessive abrasion or wear, or the hose is damaged, it must be replaced prior to the 

appliance being put into operation. Locate the hose out of pathways where people may trip over it or in areas 

where the hose may be subject to accidental damage 

7. 

Locate the hose out of pathways where people may trip over it or in areas where the hose may be subject to 

accidental damage. 

8. 

Children and adults should be alerted to the hazards of the high surface temperatures of this appliance and 

should stay away to avoid burns or ignition of clothing. 

9. 

Young children should be carefully supervised when they are in the area of the appliance. 

10. 

Clothing or other flammable material should not be placed on or near the appliance. This appliance should not 

be used as a drying rack for clothing. 

11. 

Any safety screen or guard removed for servicing an appliance must be replaced prior to operating the 

appliance. 

12. 

Installation and repair should be done by a qualified service person. The appliance should be inspected before 

use and at least annually by a professional service person. More frequent cleaning may be required due to 

excessive lint from carpeting, et cetera. It is imperative that control compartments, burners and circulating air 

passageways of the appliance be kept clean.  

13. 

Do not use this appliance if any part has been under water. Immediately call a qualified service technician to 

inspect the unit and to replace any part of the control system and any gas control which has been underwater. 

 

 

 

 

 

 

In the Commonwealth of Massachusetts, the installer or service 

agent shall be a plumber or gas fitter licensed by the 

Commonwealth of Massachusetts. 

For the State of Massachusetts, flexible connectors shall not 

exceed 36 inches in length. 

For the state of Massachusetts a T-handle gas shut-off valve 

must be used on a gas appliance. 

 

2

Содержание OB24MAP





















































Отзывы: