Barazza FEEL 1FFYPPI, Технические характеристики, Страница: 23 / 208

23
ENGLISH
9 When the pyrolytic cleaning cycle has fi -
nished, you will hear an alarm.
10 Touch any of the oven’s sensors to stop
the alarm.
11 The oven’s heating process has finished.
However, the oven is extremely hot and
cannot be used. The cooling motor will
operate until the oven cools down.
IMPORTANT
The cooling process may last up to 2 hours
owing to the high temperatures inside the
oven.
12 Open the oven door and wipe the inside
with a damp cloth, cleaning up the ash
from the cleaning cycle. Areas in the oven
that are difficult to access will need to be
cleaned with a non-metallic fibre scourer.
13 Once the oven is clean, do not forget to
replace the suppor ts and accessories.
14 The oven is now ready to be used again.
IMPORTANT: If any incidents are detected in
the programming and operation of this func-
tion, consult the section “Incidents while
Operating the Pyrolytic Function”.
CANCELLING THE PYROLYTIC CLEANING CYCLE
To cancel the pyrolytic cleaning cycle, remem-
ber:
a) The oven is cold:
– Switch off the oven by touching sensor
(10).
– You will see the time remaining until the
door unlocks on the display (4).
– When this time gets to 0:00 you will be
able to open the oven door.
b) The oven is hot:
– Switch off the oven by touching sensor
(10). The time 0:00 will be shown on the
central display (4).
– The oven’s cooling motor will continue to
operate.
– When the electronics detect that the
oven is cold, you will see the time
remaining until the door unlocks on the
display (4).
– When this time gets to 0:00 you will be
able to open the oven door.
3172892-001 20/05/15 12:39 Página 23