Barazza 1PIDGP6N, Инструкция по использованию и установке

Страница: 18 / 48

18
From this chart it is possible to know at
which power levels to set each cooking
zone of the hob, based on the maximum
power of the chosen hob.
For example, if I establish that the hob
must have a maximum power level of
1000W, I know that I can set the two large
zones (Ø 210) and a smaller zone (Ø
145) to a maximum power level of 3, while
the other small area (Ø 145) can reach
power level 2.
2
3
4
1
QUICK HEATING/POWER BOOST
This function further reduces cooking time
in a given area taking the temperature
to the maximum power for a 10 minute
interval. At the end of this interval, the
cooking area power automatically returns
to level 9.
The use of this function is recommended
for heating a large quantity of liquid in a
very short time (i.e. water for cooking
pasta) or other dishes.
To activate this function, select the cooking
area and press the key up to level 9.
Press the key again.
An acoustic signal will be emitted and a
symbol will be visualised on the display
E relative to the area.
RESIDUAL HEAT
If the temperature of the cooking area is still
high (over 50°) after it has been switched
off, the relative display will indicate the
symbol (residual heat). The symbol will
only switch off when the burn risk is no
longer present.
POT DETECTION
If the symbol should appear on one of
the cooking area displays, it means that:
1)
The recipient being used is not suitable
for induction cooking.
2)
The diameter of the recipient used is
inferior to that allowed by the appliance.
3)
No recipient is present.
TIMER
This function allows you to set the time
(from to minutes) to automatically
switch off of the selected cooking zone.
Select a cooking zone by pressing one of
the F keys and set the power by pressing
the
C
or
D
keys.
To activate the timer press again the F key,
an acustic signal will be heard and the ‘‘t’’
symbol will appear on the display of the
selected cooking zone.
Set the time by pressing the C or D keys.
If the cooking zone is in the lower part of
the cooktop the time will be shown on the
display of the cooking zone in the upper
part of the cooktop and vice versa. Press
the key
F
again to confirm your selection.
When the timer function elapses, the
cooking zone will automatically switch off
and an acoustic signal will be heard.
To disable the timer function, press the
F
key on the cooking zone previously started,
bring the timer value back to by using
the D key, then press the B key again to
confirm your selection.
CONTROL PANEL LOCK
The key blocks the hob functioning,
in order to prevent any unintentional
operation (e.g. by children). In this state no
action on the keys has effect. To activate
the safety function, press the key until
the warning light switches on. The cooking
top can however be switched off even when
the controls block is activated. In this case
the controls block remains active when the
top is switched on again. To deactivate the
safety function press the key until the
warning light switches off.