Barazza 1FICN9E, Инструкция по эксплуатации, Страница: 39 / 108

39
9 FUNCTION DESCRIPTION
Buzzer tone selection
Press the timer button for 2 seconds, until the “tonX” (X=1, 2 or 3) appears on
the timer display. Every press of the same button thereafter will scroll through all 3
available tones. The last heard tone will be recorded in memory (Factory Setting is
Ton 1.).
Error Indications
When situations preventing normal operation of the control occur, the device
enters the Error Mode. Any active Cooking will be terminated and an error code is
displayed on Temperature Display. Even if the error recovers, this code will remain
on the display until the button is pressed.
Error Code Definition of error and possible causes
Er1 PT1000 Open circuit or damaged
Er2 Reserved
Er3 Meat probe short circuit
Er4 Temperature sensor reading exceeds 400°C
Er5
At Manual mode or Cooking with Meat Probe, maximum working
time limit (10 hours) has been exceeded
ATTENTION - For oven with Manual Thermostat
If the oven is set up with light fu 0°C and the red light remain slightly
turned on, you have to switch the blue cable(neutral) with the brown one(phase) in
the plug.