®
SETTE™ 270W QUICK START GUIDE
Rev 11/20/2016 (v7)
Programming:
The Sette 270W is equipped with three programmable
buttons. The buttons are simply labeled 1,2,3. These
programmable buttons only adjust the desired grind weight,
they do not adjust the grind setting (i.e. Coarse/Fine). Each
button comes from the factory with the following presets:
Weight: 1=18g, 2=25g, 3=35g
You can easily program more or less grams as follows:
1.
Select a Preset button.
2. Press the up or down arrow buttons to adjust
the weight.
3. Once you have reached the desired gram setting,
press and hold the desired preset button for 3
seconds. The screen will blink to confirm the
setting is stored.
To program the other buttons repeat steps 1-3.
Bag of Tools:
We have included a small bag with tools and shims.
5mm hex key
used for removing the cone burr
from the holder.
Shims
used for recalibrating the machine to a finer range.
2mm hex key
used for adjusting the portafilter hook.
Detailed instructions can be found in the full manual,
see link below.
Need Help?
If you have any questions or concerns, please email:
The full manual can be found on our website at:
www.baratza.com/documentation/
For video instructions and troubleshooting guides:
www.youtube.com/user/Baratzallc1/search?query=sette
!
Use only with AC current and the correct voltage.
See the label on the base of the grinder to determine the
correct voltage.
!
Only clean the grinder housing with a dry or slightly damp
cloth. Do not immerse the grinder, plug or cord in water or
any other liquid.
!
Baratza will not accept any liability for damage, injury, or
warranty if the grinder is used other than for its intended
purpose (i.e. grinding roasted whole coffee beans) or is
improperly operated or repaired.
!
Keep the appliance and its cord out of reach of children
aged less than 8 years
!
Do not operate the grinder with a damaged cord or plug.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard
!
Do not leave your grinder unattended while turned ON.
!
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved.
!
Cleaning and user maintenance shall not be made by
children without supervision.
!
Always unplug the grinder from the electrical supply
before assembling, disassembling or cleaning.
!
To unplug, grasp plug and remove from the outlet. Never
pull on the cord.
CAUTION: ALWAYS unplug the electrical supply
cord prior to cleaning the grinder.
SAFETY INFORMATION:
Please read the information below very carefully. It contains important safety information for this appliance.
Please keep these instructions for future reference.
