Baracoda TagRunners – User Guide v1.1
- 6 -
Data Capture
for Workforce
in Motion
BCL LED:
Single Blinks (e.g. *pause*pause*…)
The reader is ready to be connected
Double fast Blinks (e.g. **pause**pause**…)
The reader is connected
The led colour is Green
The reader is set in Real Time mode
The Led Colour is Orange
The reader is set in Batch mode
The Led Colour is blinking Orange/Green
The reader is set in Batch mode, but no data is stored in
the memory
RSL LED:
One Single long Blink (green colour)
The reader has just read and decoded a Tag
One Single long Blink (orange colour)
You pressed the Trigger button, and the reader is trying to
read a Tag (Trigger mode)
The Led Colour is blinking Orange
The reader is trying to read a Tag (Smart Autoscan mode)
The Led Colour is Orange (solid)
The reader is trying to read a Tag (Autoscan mode) or the
reader is trying to read / write the TAG Memory.
Double fast Blinks Red
Battery level is low. Please recharge the battery
immediately
One Single long Blink Red + Green (solid)
The reader is charging
Green (solid)
The reader is fully charged
Special cases:
Both LEDs blinks orange
The reader is set in the “Real Time with No Data Loss
mode” but with no bufferisation (buffer configured to 0)
and is not connected. In this particular situation the RFID
antenna is disabled: impossible to read Tags in this mode.
Both LEDs are orange (solid)
The reader is set in the “Batch mode” and its memory is
full: impossible to read another Tag in this mode.
