D-Fly – Programming Guide v1.2
- 10 -
Data Capture
for Workforce
in Motion
1.4.
Operating Mode
Real Time mode (standard mode): barcodes are transmitted in real time to the remote host device/terminal
(with optional acknowledgment beep from the host to the scanner).
User can choose if the scanner, when not connected, should read, memorize and later automatically upload the
barcodes or shouldn’t read the barcodes (no beam).
Important reminder: if an ACK beep or buffer is needed, the scanner must be set in the “no data loss mode”
first.
1.4.1.
Real Time mode
Erases all codes in memory and forces the D-Fly in Real time mode. No other setting is changed.
Enable
1.4.2.
Real Time mode with “No data loss mode”
Forces the D-Fly in Real Time mode (with data acknowledgement). Erases all codes in memory. The D-Fly
should have been previously set in the “No data loss mode” ON.
Enable
1.4.3.
REAL TIME without “No data loss mode”
Forces the D-Fly in Real Time mode (without data acknowledgement). Erases all codes in memory.
The D-Fly should have been previously set in the “No data loss mode” ON.
Enable
