Baofeng UV-5R Series, Документация

Страница: 50 / 74

The (Chinese) Radio Documentation Project
42 Repeaters
9.
Use the and keys to select
+
(positive) or
-
(negative) offset.
10. Press
to confirm and save.
11. Optional:
a. Save to memory, see the section called “Manual programming” for details.
b. Set up CTCSS, see the section called “CTCSS” for details.
12. Press
to exit the menu.
If everything went well, you should be able to make a test call through the repeater. If
you're experiencing problems making a connection to the repeater, check your settings
and/or go through the procedure again.
Certain Amateur Radio repeaters (especially in Europe) use a 1750Hz tone burst to open
up the repeater. To see how this is done with the Baofeng UV-5R, see the section called
“1750Hz Tone-burst”.
If you're still unable to make a connection, contact the person in charge of the radio
system with your employer or your local amateur radio club, as the case may be.
If you for some reason want to listen to the repeater's input frequency instead, press
momentarily and you'll reverse your transmit and receive frequencies (reverse
function not available while in Dual Watch mode).
This is indicated in the LCD on the radio with a
R
in the top row, next to the
+
and
- for the offset direction.