background image

5.

 

  Keep the product and its accessories out of reach of children and pets. 

6.

 

  Please operate the product within the specified temperature range. 

7.

 

  Continuous transmission for a long time may lead to heat accumulation within the product. In this case, please keep it at 

a proper location for cooling. 

8.

 

  Handle the product with care. 

9.

 

  Do not disassemble, modify or repair the product and its accessories without authorization. 

Precautions for Batteries                     

                                                                                                   

Charging Prohibitions 

To protect you against any property loss, bodily injury or even death, be sure to observe the following safety instructions: 
1.

 

Do not charge or replace your battery in a location containing fuels, chemicals, explosive atmospheres and other 

flammable or explosive materials. 

2.

 

Do not charge your battery that is wet. Please dry it with a soft and clean cloth prior to charge. 

3.

 

Do not charge your battery suffering deformation, leakage and overheat. 

4.

 

Do not charge your battery with an unauthorized charger. 

5.

 

Do not charge your battery in a location where strong radiation is present. 

6.

 

Overcharge shall always be prohibited for it may shorten the life of your battery. 

Important Tips 

To help you make better use of the product, be sure to observe the following instructions: 
1.

 

  Do not use any unauthorized or damaged accessory. 

2.

 

  Keep the product at least 2.5 centimeters away from your body during transmission. 

3.

 

  Do not keep the product receiving at high volume for a long time. 

4.

 

 

 

For vehicles with an air bag, do not place the product in the area over the air bag or in the air bag deployment area.

Содержание H-888S
















Отзывы: