background image

Operations                                                                                                                                   

Power on/off and volume adjustment   

Rotate the Power/Volume knob clockwise to turn the radio on. Rotate the control clockwise /counter-clockwise to adjust the 
volume level as you prefer. To turn the radio off, rotate the control counter-clockwise till hearing a mechanical “click”. 

Transmission   

To communicate, all radios in your group must be set to the same channel. Briefly press the Side key 1 to enable the Monitor 
feature in order to make sure that the frequency is not busy, and then press the PTT button. Release the PTT key to receive. 
Only  one  user  at  a  time  can  talk  during  radio  communications.  Therefore,  it  is  important  not  to  transmit  when  you  are 
receiving a communication and use the transmission mode sparingly to allow other users to talk. Transmission consumes a 
significant amount of energy and should therefore be used sparingly to prolong the battery life. If you are unable to contact a 
station that you have no problems in receiving, the station may be using CTCSS tones or DCS codes. 

Monitor   

The Monitor feature is for excluding (opening) the Squelch, in order to listen to signals that are too weak to keep the Squelch 
permanently opened. Hold down the 

Side key 1

 to enable such function. 

Scan   

This function can be activated only by means of the optional programming software. To enable the Scan function, all 22 
channels must be programmed. If you turn on the radio on channel 16, the scanning will automatically start. Whenever any 
signal is detected, the scanning will stop on a busy channel. If the PTT is pressed, you will transmit on the latest busy channel. 
Channel 16 is the priority channel; therefore if you don’t pick up any signal when you press PTT, the radio will transmit on 
channel 16. 

Squelch   

The  Squelch  function  suppresses noises  on  free channels  and  allows  receiving  even  weak  signals.  H-888S  has 10  different 
Squelch levels that can be set by programming software: 0 means that the Squelch is turned off; from level 1 to level 9 you 

Содержание H-888S
















Отзывы: