BANZAI 3
BANZAI 2
Safety Information
BATTERY WARNINGS!
• Only adults should replace batteries.
• Alkaline batteries recommended.
• Do not use rechargeable batteries.
• Non-rechargeable batteries are not to be recharged.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Remove batteries from the product before extended
storage.
• Batteries have to be placed by respecting the
polarity indicated on the toy and on the battery. An
incorrect location can either damage the toy, cause
leaks at the batteries level, or, to an extreme
degree, set the battery on fire or explode.
• Never throw batteries into fire, they could explode.
• Please keep this information for future reference.
4.
5.
Installing / Replacing Batteries
(Batteries not included)
1.
Unscrew the top cover on the controller unit with a screwdriver as shown.
2.
Take out the battery box.
3. Install 8 x 1.5V “D” (LR20) size batteries accordingly.
4. Place the battery box back inside the controller unit and screw on the top cover with a screwdriver.
5. To replace batteries, make sure to remove the Motorized Bumper Boat™ from the swimming pool, unlock the
controller unit from the Motorized Bumper Boat™ and repeat procedures 1 to 4.
NOTE: Never install or replace the batteries while the toy is still wet or in the pool.
Another Side
1.
2.
3.
BEFORE RETURNING TO STORE
PLEASE VISIT
THE CUSTOMER SERVICE WEBSITE
BELOW FOR IMMEDIATE ASSISTANCE
REGARDING QUESTIONS OR
PROBLEMS WITH THIS PRODUCT.
www.toysinquiry.com
OR
1 - 8 0 0 - 4 3 4 - 6 1 7 8