WXG-4 Manual Polarimeter
1
Introduction
Thank you for selecting the Bante Instrument
’
s WXG-4 manual polarimeter. This manual provides a step-by-step guide to help you operate the instrument,
please carefully read the following instructions before use.
Unpacking
Before unpacking, ensure that the current work environment meet following conditions.
●
Ambient temperature is greater than 0
o
C and less than 40
o
C.
●
No potential electromagnetic and ambient light interference.
The following list describes the standard accessories of the polarimeter. After the unpacking, please check all accessories are complete. If any are damaged
or missing, please contact nearest distributor.
Test tube 100mm
Test tube 200mm
Sealing rings
Prior to Use
Before plugging the plug into the power outlet, ensure that local mains power voltage matchs the polarimeter requirements.
1.1 Close the lid of polarimeter. Press the power switch to the
“
ON
” position, the sodium lamp will gradually light up.
1.2 Wait for the light source to stabilize, rotate the focus knob until the visual field became legible.
1.3 Rotate the vernier knob makes the vernier scale aim at zero position.
Focus knob
Vernier knob
