Setup
I
2
Meter Setup
The TB200 turbidity meter contains an integrated setup menu for
customizing the displayed option to meet measurement requirements.
The following table describes the functions of each menu item.
Setup Menu
Date and Time
Set the year, month, day, hour, minute for data log.
Measurement Mode
Select the desired measurement mode and unit.
NTU
Nephelometric turbidity unit (default)
FNU
Formazin nephelometric unit
EBC
Turbidity unit of the European Brewing Convention
ASBC
Turbidity unit of American Society of Brewing Chemists
mg/L
Total suspended solids unit
Resolution
Set the resolution of the turbidity measurement.
0.1
default
0.01
TSS Factor
Set the conversion factor for measurement of the total suspended
solids.
0.13
default
Auto-Power Off
If enabled, the meter will automatically switch off if no key is pressed
within 2 hours.
2 hours
default
Disable
Delete Data
Delete all data logs in the memory.
Delete all stored data
Cancel
default
Brightness
Set the brightness level of backlight.
Password
Set the password protection for setup menu and calibration.
Enable
Disable
default
Reset
Reset the meter to factory default settings. Note, the meter must be
recalibrated.
Enable
Disable
default
Setting a Default Option
1.1 Press and hold the
key to enter the setup menu.
1.2 Press the
/
key to select a menu item or an option.
1.3 Press the
Enter
key to save.
To exit the setting without saving changes, press the
ESC
key.
Setting the Password
The password protection feature is used to prevent the unauthorized
calibration and settings. If enabled, the user must enter a 4-digit
password to enter the setup menu or calibration mode.
2.1 Press and hold the
key to enter the setup menu.
2.2 Press the
key to select the
Password
, press the
Enter
key to
confirm.
2.3 Press the
key to select the
Enable
. Press the
Enter
key, the
screen shows 0000 and the cursor appears below the first digit.
2.4 Press the
/
key to set the password, press the
Enter
key
to confirm until the meter returns to the measurement mode.
Unlock the Password
If your password has created, the meter will show Password Protection
screen when pressing the
Cal
key. Press the
/
key to enter
the password, press the
Enter
key to confirm, the meter will unlock
immediately. If you forgot your password, please contact supplier and
providing the serial number of the meter.
