1
I
MS series
Introduction
Thank you for selecting the MS series magnetic stirrer. This manual
provides a step-by-step guide to help you operate this device, please
carefully read the following instructions before use.
Environmental Conditions
Before unpacking, ensure that current environmental conditions meet
the following requirements.
•
Relative humidity is less than 80%
•
Ambient temperature between 0° C (32° F) and 40° C (104° F)
•
No corrosive gas exists and well-ventilated area
Packing List
The following list describes all components of the stirrer. If any items
are missing or damaged, contact the supplier immediately.
•
Magnetic stirrer
• S
tir bar
•
Temperature probe (only for MS300 and 400)
Stirrer Overview
Keypad
Key
Function
Time
Set the stirring time
° C
Set the heating temperature
Enter
Confirm the settings
Exit
Exit the setting, heating or timed stirring mode
Increase value or stirring speed
Decrease value or stirring speed
Connectors
1 Socket for temperature probe
2 Power switch
3 Fuse
Safety Notes
•
Before connecting the power supply, ensure that the local mains
power voltage matches the stirrer requirements and the power
outlet has been properly grounded.
•
Before using the stirrer, the power cable must be kept away from
the hot plate.
•
Do not use a metal container.
•
Do not heat or stir volatile or flammable liquids.
Stirring
1. Place stir bar into the container and fill the liquids to be stirred.
2. Place container in the center of the top plate.
3. Press the power switch to
ON
position.
4. Press the
or
key to set the stirring speed, the stir bar will
begin running after 5 seconds.
