BANTE221 PORTABLE PH/ORP METER
17
Hold Function
Bante221 portable meter contains two data hold modes. When the Auto-Hold function is enabled, the meter will automatically sense a
stable endpoint measured value and freeze it,
“HOLD” indicator appear
s on the display. If the Auto-Hold function is disabled, press
key,
the meter will immediately freeze currently displayed value. Press the key again to release the measured reading, you can continue to take
measurement.
Storing and Recalling Data from Memory
The meter allows up to 500 data sets to be stored and recalled.
MEMORY INPUT:
In the measurement mode, press MI key to input measured value into the memory,
“Memory” indicator appears on the display.
MEMORY RECALL:
1. Press MR key in the measurement mode, the meter shows “LOC” (Data Log).
2. Press ENTER key to confirm, the meter shows page number of the stored data set.
MI