- 2 -
- Operating software
Every operating program in the unit is controlled with mutual links and
communications to prevent every possible error, so it introduces the maximum safety,
such as input voltage warning, reverse polarity protection and Lithium cell-count input
error warning. The entire firmware can be upgraded via USB from internet download at
our web page, when there needs to be changed.
- High-power and high-performance circuit
BC8HP employs the circuit that has maximum output power of 280Watts. As a result,
it can charge or discharge up to 27 cells of NiCd/NiMH and 8 series of Lithium batteries
with maximum current of 12A. Furthermore, the cooling system is so efficient that can
hold such a power without any trouble running the circuit or the operating program.
- Accept various types of Lithium battery
BC8HP can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have
different characteristics by their chemistry. You can select any one of them that you are
going to process before the job. For their specifications, refer 'Warnings and safety
notes' section.
- Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes. 'Fast' charge reduces the
charging time of Lithium battery and 'Storage' mode controls the final voltage of the
battery to be suit for long time storage.
- Maximum safety
Delta-peak sensitivity : The automatic charge termination program works on the
principle of the Delta-peak voltage detection. (NiCd/NiMH)
Auto-charge current limit : When charging NiCd or NiMH at 'AUTO' current mode, you
can set the upper limit of charge current to avoid from feeding high current to the
battery. This is very useful when charging the low impedance and small capacity NiMH
battery in 'AUTO' mode.
Capacity limit : The charging capacity always calculated by multiple of the charging
current and time. If the charging capacity exceeds the limit the process will be
terminated automatically when you set the maximum value.
Thank you for purchasing the e-STATION BC8HP charger. You get a rapid
charger/discharger with integrated balancing circuit, which is computerised with a high
performance microprocessor and specialised operating software. Please read this
operating manual completely and attentively as it contains a wide variety of specific
programming and safety information.
You need to keep this manual in a safe place, and be sure to pass it on to the new
owner if you ever dispose of BC8HP.
Special features
+
-
+
-
+
-
+
-
+
-
+
-
-
+
-
+
-
-
+
-
+
-
+
-
+
-
!
!
!
