+
-
+
-
+
-
+
-
+
-
+
-
BC6
3-pin port for
Temperature
sensor or USB
Individual cell
connector port
Dec/Inc
To select sub program
To alter the value
Batt type/Stop
To select main program
To stop the operation
Charging lead
connector
(4mm banana female)
Start/Enter
To resume or start the operation
LCD screen
(16chr. x 2lines)
Input power cable
(DC11~18V)
Exterior of the unit
Temperature limit(*): The temperature of the battery on charging will rise by its internal chemical
reaction. If you set the limit of temperature the process will be expired forcibly when the limit has
reached.
Processing time limit: You can also restrain the maximum process time to prevent from any
possible defect.
Input power monitor: To protect the car battery using as DC input power from being damaged
the voltage of it always monitored. If it drops below the lower limit the process will be ended
automatically.
- Data store/load
For users convenience it can store maximum five data of different batteries. You can establish
the data contains program setting of the battery to charge or discharge continually. These data
can be called out at any time you need and the process can be executed without program setting.
- Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery
refreshing and balancing.
- PC based analysis using USB communication(**)
For technical expert, BC6 offers PC based program can analysis the characteristic of the
battery by USB port. It shows a graph of voltage, current, capacity and temperature curves. It also
shows the individual voltage of each cell in the Lithium battery pack.
* Separately purchased temperature sensor(Part no.; EAC110)
** Separately purchased program kit (Part no.: EAC200, Software CD plus USB link cable)
- 3 -
AC Input power port
(AC 100~240V, 50/60Hz)
