4 cell
3 cell
2 cell
1 cell
5 cell
6 cell
Individual
bal. port
-
+
+
-
-
+
1S
-
+
2S
-
+
3S
LiPo 1S
LiPo 2S
LiPo 3S
LiPo 4S
LiPo 5S
+
+
-
+
-
+
-
+
-
+
-
Top View
LiPo 6S
+
-
4 cell
3 cell
2 cell
1 cell
5 cell
6 cell
Individual
bal. port
-
+
-
+
Top View
BC6
This is for balancing the voltages of Lithium batteries of the battery pack to be charged. To do this,
the battery pack being charged should have the individual cell connector. And connect it to the
individual port at the right side of charger with a suitable connection cable that fits with your battery
pack. And also, you need to connect the battery output plug to the output of charger.
In this mode, the charging process will be different from ordinary charging mode. The internal
processor of the charger will monitor the voltages of each cell of the battery pack and controls the
charging current that is feeding to each cell to normalise the voltage.
The value on the left side of second line sets a charge
current and the value on the right side of second line
sets the voltage of the battery pack.
After setting the current and voltage press key for
more than 3 seconds to start the process.
This shows the number of cells you set up and the
processor detects. 'R:' shows the number of cells found
by the charger and 'S:' is the number of cells selected
by you at the previous screen. If both numbers are
identical you can start charging by press button.
If not, press button to go back to previous screen.
Then carefully check the number of cells of the battery
pack to charge again.
The screen shows the present situation during charge
process. To stop charging press key once.
Display
Display
Display
Li3S 1.2A 12.59V
BAL 022:43 00682
LiPo BALANCE
2.0A 11.1V(3S)
R: 3SER S: 3SER
CONFIRM(ENTER)
battery
voltage
charge
current
charged
capacity
charging
time
number
of
cells
Charging Lithium battery at balance mode
+
-
+
-
'> 3 seconds'
Start
Enter
Batt type
Stop
DEC
◀
INC
▶
DEC
◀
INC
▶
Batt type
Stop
Start
Enter
Start
Enter
Batt type
Stop
Start
Enter
Individual cell connection diagram (pin-assignment of 8-pin)
- 10 -