Page 7 of 21
outlet box.
When cutting or drilling in the ceiling or wall, do not damage electrical wiring and other hidden
utilities.
To reduce the risk of injury, do not bend blade holders during installation to motor, balancing or
during cleaning. Do not insert foreign object between rotating blades.
Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to
be mounted to an outlet box marked “Acceptable for Fan Support”.
When moving or cleaning fan, turn off power at service panel and lock service disconnecting
means to prevent power being turned on accidently. When the service connecting means cannot
be locked, securely fasten a prominent warning device, such as a tag to the service panel.
All set screws must be checked and re-lightened where necessary before installation.
Do not place the fan near an open flame, cooking or heating appliance, or hot surface.
This fan should NOT be operated outside.
Assembly and Installation Instructions
⚠
WARNING
To reduce the risk of injury to persons, the fan must be installed so that the blades are a height
greater than 3 meters (10 feet) above the floor.
To reduce the risk of electric shock, or personal injury, mount to outlet box marked “acceptable for
fan support of 22.7 Kg (50 lb.) or less” and use mounting screws provide with the outlet box and/or
support directly from building structure. Most outlet boxes commonly used for the support of
lighting fixtures are not acceptable for fan support and may need to be replaced. Consult a
qualified electrician if in doubt.
To reduce the risk of fire or electrical shock, this fan should only be used with fan speed control
part #: BF-5, manufactured by: Zhongshan Hongwei Motor Manfacturing Co,.Ltd.
Installation work and electrical wiring must be done by a qualified electrician in accordance with all
applicable codes and standards (ANSI/NFPA 70-1996) including fire-rated construction.
Before you begin installing the fan, switch power off at the service panel and lock service
disconnecting means prevent power from switched on accidently. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag to the service
panel.
If the power supply cord is damaged, contact your local service center or a qualified electrician to
install an appropriate replacement cord to prevent any injury or damage.
When cutting or drilling in the ceiling or wall, do not damage electrical wiring and other hidden
utilities.
To reduce the risk of injury, do not bend blade holders during installation to motor, balancing or
during cleaning. Do not insert foreign object between rotating blades.
Attach the mounting bracket using only the hardware supplied with the outlet box. Fan is only to
be mounted to an outlet box marked “Acceptable for Fan Support”.
