Page 11 of 21
DOWNROD PREPARATION
Re-install pin into downrod.
Slide the downrod ball up to the top of the downrod.
Re-install the screw to secure ball to downrod.
Note: Some extended downrods have a pre-drilled set-screw hole. If a pre-drilled hole is present in
the extended downrod, tighten the set screw into the pre-drilled hole in the extended downrod.
Tighten the screw against the downrod to secure the downrod ball.
HANGING ASSEMBLY
Carefully lift fan assembly onto mounting bracket.
Rotate fan until notch on downrod ball (1) engages the ridge of the mounting bracket (2). This
will allow for hands-free wiring.
Securely tighten safety wire (1) to hanger bracket (2).
