WORLD-BEAM
®
QS30 Series –
Polarized Retroreflective Laser Sensors
6
P/N 112355 rev. A
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
SETUP Mode
SETUP mode is accomplished via the sensor’s two push buttons. It is used to change
sensor output response for:
• Light or Dark Operate
• 30-millisecond pulse stretcher (OFF-delay), if required.
The status LEDs, active only during SETUP mode, indicate the output response
configuration when the sensor will be in RUN mode.
Figure 5. SETUP mode
1
1
3
3
4
4
5
5
6
6
7
7
8
8
2
2
LO
DO
+
GAIN
—
SETUP
Status
Indicators
Push Button
0.04 seconds
≤
T
≤
0.8 seconds
Result
Access
SETUP
Mode
• Press and hold both push
buttons > 2 seconds
• Green Power LED turns OFF
Select
SETUP
Options
• Click either push button to toggle
through the four possible setting
combinations
DO, No Delay
DO, 30 ms Delay
LO, 30 ms Delay
LO, No Delay
Return
to
RUN
Mode
• Press and hold both
push buttons > 2 seconds
• Green Power LED turns ON
+
—
GAIN
GAIN
+
—
GAIN
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
+
—
or
