SureCross
®
Quick Start Guide for DX80SRxM-H Serial Data Radios
Step 4 - Apply Power to the Serial Data Radios
1. Wire power and serial lines to the base screw terminals. For this example, wire the terminals to the color as shown.
2. Reinstall the ribbon cable.
3. Replace the radio covers.
4. Apply power to both radios.
brown
white
blue
black
Step 5 - Form the Wireless Network
1. Use the supplied spanner wrench to remove the front round cover.
2. To enter binding mode, triple-click the button on both the master and slave radios.
While in binding mode, the slave radio pairs up to the master radio. During this process, both LEDs alternately flash red on both
devices.
After binding is complete, the slave radio automatically exits binding mode. The master radio remains in binding mode so users
can bind additional slave radios. To exit binding mode on the master radio, double-click the button.
Spanner wrench
Round cover
Button
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
