5-Pin Threaded M12 Splitter Cordset with Flat Junction—Double Ended
Model
Trunk (Male)
Branches (Female)
Pinout (Male)
Pinout (Female)
Branch 1
Branch 2
Branch 3
Branch 4
3 x 18
72 mm
2 x 19
32 mm
Male Trunk
Length
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
5-Pin Threaded M12 Splitter Tee
Model
Description
Pinout (Male)
Pinout (Female)
CSB-M1250M1250-T
Female trunk, 1 female branch, 1 male
branch
1
4
5
3
2
1 = Brown
2 = White
3 = Blue
2
3
4
1
5
4 = Black
5 = Green/Yellow
Brackets and Covers
LMB30LP
•
Low profile
•
30 mm mounting hole
•
300 series stainless steel
2 X Ø5.5
Ø30.5
65
50
40
26
WC-R70 Washdown Cover
• FDA-grade silicone
• Fits R70 data radios
• IP67 and IP69K
rated
Warnings
Install and properly ground a qualified surge suppressor when installing a remote antenna system. Remote antenna configurations installed without
surge suppressors invalidate the manufacturer's warranty. Keep the ground wire as short as possible and make all ground connections to a single-
point ground system to ensure no ground loops are created. No surge suppressor can absorb all lightning strikes; do not touch the Sure Cross
®
device or any equipment connected to the Sure Cross device during a thunderstorm.
Exporting Sure Cross
®
Radios. It is our intent to fully comply with all national and regional regulations regarding radio frequency emissions.
Customers who want to re-export this product to a country other than that to which it was sold must ensure the device is approved in the
destination country. The Sure Cross wireless products were certified for use in these countries using the antenna that ships with the product. When
using other antennas, verify you are not exceeding the transmit power levels allowed by local governing agencies. This device has been designed to
operate with the antennas listed on Banner Engineering’s website and having a maximum gain of 9 dBm. Antennas not included in this list or having
a gain greater that 9 dBm are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen such that the equivalent isotropically radiated power (EIRP) is not
more than that permitted for successful communication. Consult with Banner Engineering Corp. if the destination country is not on this list.
Important: Please download the complete Sure Cross
®
R70SR Serial Data Radio technical documentation, available in multiple
languages, from www.bannerengineering.com for details on the proper use, applications, Warnings, and installation
instructions of this device.
Important: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los Sure Cross
®
R70SR
Serial Data Radio, disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las
instrucciones de instalación de estos dispositivos.
Important: Veuillez télécharger la documentation technique complète des Sure Cross
®
R70SR Serial Data Radio sur notre site
www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les notes de sécurité et les
instructions de montage.
WARNING:
• Do not use this device for personnel protection
• Using this device for personnel protection could result in serious injury or death.
• This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety
applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition.
Sure Cross
®
R70SR Serial Data Radio
P/N 224673 Rev. B
www.bannerengineering.com - Tel: + 1 888 373 6767
7
