10. Screw on the lid and tighten.
11. After replacing the battery, allow up to 60 seconds for the device to power up.
12. Properly dispose of your used battery according to local regulations by taking it to a hazardous waste collection site, an
e-waste disposal center, or other facility qualified to accept lithium batteries.
As with all batteries, these are a fire, explosion, and severe burn hazard. Do not burn or
expose them to high temperatures. Do not recharge, crush, disassemble, or expose the
contents to water.
The battery may be replaced in explosive gas atmospheres. Replacement battery model
number: BWA-BATT-001. For pricing and availability, contact Banner Engineering.
WARNING:
•
Do not replace battery when an explosive dust atmosphere may be present.
•
The replacement battery MUST be a Banner approved battery, model number BWA-BATT-001. Use of a
different battery will VOID the intrinsic safety rating of this device and may result in an explosion!
•
When replacing the battery, the negative end of the battery holder is the side by the large capacitors. This
side is marked with a minus (
−
) sign.
•
Do not attempt to recharge the battery. These batteries are not rechargeable. Recharging may cause
serious injury to personnel or damage the equipment. Replace only with factory recommended batteries.
Sure Cross
®
Performance DX80 Wireless I/O Networks
www.bannerengineering.com - Tel: 763.544.3164
75
