Discrete Input Wiring for PNP Sensors
Discrete Input Wiring for NPN Sensors
Discrete IN
PWR
10-30V dc
Discrete IN
GND
dc common
Wiring Diagrams for Discrete Outputs
Connecting dc power to the communication pins will cause permanent damage. For the DX8x...C models, PWR in the
wiring diagram refers to V+ on the wiring board and GND in the wiring diagram refers to V- on the wiring board. To power
the sensor using the switch power output (SPx), replace the PWR with SPx in these wiring diagrams.
Discrete Output Wiring (PNP)
Discrete OUT
GND
PWR
10-30V dc
Load
dc common
Wiring Diagrams for Analog Inputs
Connecting dc power to the communication pins will cause permanent damage. Do not exceed analog input ratings for
analog inputs. Only connect sensor outputs to analog inputs.
Analog Input Wiring (10–30 V dc Power)
Analog Input Wiring (4–20 mA, 2-Wire, Externally-
Powered Sensors)
Analog IN
PWR
10-30V dc
GND
−
+
sensor
dc common
Analog IN
GND
dc common
external power
−
+
sensor
Wiring Diagrams for Analog Outputs
Connecting dc power to the communication pins will cause permanent damage.
Analog Output Wiring
AOx
GND
dc common
PWR
10-30V dc
sensor
LED Behavior for the Nodes
Nodes do not sample inputs until they are communicating with the Gateway. The radios and antennas must be a minimum
distance apart to function properly. Recommended minimum distances are:
2.4 GHz 65 mW radios: 1 foot
900 MHz 150 mW radios: 6 feet
900 MHz 1 Watt radios: 15 feet
Sure Cross
®
Performance Node
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 155862 Rev. G
