4
© Banner Engineering Corp. www.bannerengineering.com
R95C 8-P
ORT
2-C
HANNEL
D
ISCRETE
IO-L
INK
H
UB
I
NSTRUCTION
M
ANUAL
B
ANNER
E
NGINEERING
C
ORP
.
Specifications
Required Overcurrent Protection
WARNING
:
Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations.
Overcurrent protection is required to be provided by end product application per the supplied table.
Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
LED
Indication
Status
Discrete Device Amber LEDs
Off
Discrete In and Out are inactive
Solid Amber
Discrete In or Out is active
IO-Link Communication Amber LED
Off
IO-Link communications are not present
Flashing Amber (900 ms On, 100 ms Off)
IO-Link communications are active
Power Indicator Green LED
Off
Power off
Solid Green
Power on
Supply Voltage
18 V DC to 30 V DC at 400 mA maximum (exclusive of load)
Power Pass-Through Current
500 mA per port maximum
Discrete Output Load Rating
200 mA
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Leakage Current Immunity
400 µA
Construction
Coupling Material: Nickel-plated brass
Connector Body: PVC translucent black
Vibration and Mechanical Shock
Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 0.5 mm
amplitude, 5 minutes sweep, 30 minutes dwell)
Meets IEC 60068-2-27 requirements (Shock: 15G 11 ms duration, half sine
wave)
Environmental Rating
IP65, IP67, IP68
NEMA/UL Type 1
Indicators
Green: Power
Amber: IO-Link communications
Amber: 2x Discrete IN/OUT status
Connections
(8) Integral 4-pin M12 female quick disconnect
(1) Integral 4-pin M12 male quick-disconnect connector
Operating Conditions
Temperature:
–40 °C to +70 °C (–40 °F to +158 °F)
90% at +70 °C maximum relative humidity (non-condensing)
Storage Temperature:
–40 °C to +80 °C (–40 °F to +176 °F)
Supply Wiring (AWG)
Required Overcurrent Protection (A)
Supply Wiring (AWG)
Required Overcurrent Protection (A)
20
5.0
26
1.0
22
3.0
28
0.8
1
5
2
6
3
7
4
8
Com LED
(on either side)
Power LED
(on either side)
Device LEDs x16
(on either side)
LED 1 = Discrete 1 In/Out
LED 2 = Discrete 2 In/Out
1
1
2
2
1
1
2
2
1
1
2
2
1
1
2
2
5RWDWHÛ
4
8
3
7
2
6
1
5
2
2
1
1
2
2
1
1
2
2
1
1
2
2
1
1
