background image

1 Product Description

Radar-Based Sensors for Detection of Moving and Stationary Targets

Placeholder

• FMCW (true-presence) radar detects moving and stationary objects
• Adjustable sensing field — ignores objects beyond setpoint
• Easy setup and configuration of range, sensitivity, and output with simple DIP

switches

• Easy setup and configuration of range, sensitivity, and output using a PC
• Sensing functions are unaffected by wind, falling rain or snow, fog, humidity, air

temperatures, or light

• Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication

band

• Rugged IP67 housing withstands harsh environments

Protected by US patents.

CAUTION: Make No Modifications to this Product
Any modifications to this product not expressly approved by Banner Engineering could void the user's

authority to operate the product. Contact Banner Engineering for more information.

WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury

or death. This device does not include the self-checking redundant circuitry necessary to allow its use in

personnel safety applications. A sensor failure or malfunction can cause either an energized or de-

energized sensor output condition.

1.1 Models

Models

Maximum
Range

Beam
Angle

Telecom Approval1

Output

Connection

Q130RA-9076-AFQ

24 m (78 ft)

90° × 76°

Telecom approved for US, Canada and

Brazil

Bipolar NPN/PNP

N.O./N.C.

Configurable

5-wire 2 m

(6.5 ft)

Integral

cable

Q130RA-2450-AFQ

24° × 50°

Telecom approved for Europe, UK,

Australia, New Zealand, China, and Japan

1.2 Overview

The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this

emitted energy reflects back to the receiving antenna. Signal processing electronics in the sensor determine the distance

from the sensor to the object based on the time delay of the return signal. The sensor can be configured (using a PC) to

sense objects up to a specific distance, ignoring objects beyond this distance (also called background suppression).

1 For additional countries, contact Banner Engineering.

 

 

R-GAGE

®

 Q130RA-AF Sensor

 

www.bannerengineering.com - Tel: +1.763.544.3164

3

DRAFT

Содержание R-Gage Q130RA-AF











Отзывы: