Banner Q5Z, Инструкция по эксплуатации

Страница: 9 / 41

June 23, 2023
Q5Z Global Laser Measurement Sensor With IO-Link Instruction Manual
9
•
•
•
•
•
Chapter Contents
2.1 TEACH Mode .............................................................................................................................................................................................. 9
2.2 Response Speed ......................................................................................................................................................................................... 9
2.3 Gain and Sensitivity ..................................................................................................................................................................................... 9
2.4 Delay Timer ................................................................................................................................................................................................ 10
2.5 Channel 1 Output ...................................................................................................................................................................................... 10
2.6 Channel 2 Output/Function ....................................................................................................................................................................... 10
The Q5Z Global sensor is pre­configured for ease of installation.
The following sections explain each setting. All of these settings can be adjusted from their factory default setting in the field
using either an RSD or an IO­Link interface.
For assistance configuring the sensor, contact Banner Engineering.
The default Teach mode for Output 1 is pre­configured to one of the following options.
Two­point static background suppression
Dynamic background suppression
One­point window (foreground suppression)
One­point background suppression
Dual (int distance) window
See "TEACH Procedures" on page 19 for additional information and remote input TEACH instructions.
NOTE: For one-point window (foreground suppression), the window is automatically determined during
the teach process. If a specific window size is needed, contact Banner Engineering.
The response speed is pre­configured to one of the following options.
Use the following tables to choose a response speed that is appropriate for the application. Slowing down the response
speed can assist in detecting dark targets.
Response Speed
Response Speed in Sync
Mode
Repeatability Ambient Light Rejection Excess Gain
3 ms 6 ms 1000 µs Disabled
See Excess Gain in " Specifi­
cations " on page 27
5 ms 10 ms 1600 µs Enabled
15 ms 30 ms 3 ms Enabled
25 ms 50 ms 5 ms Enabled
50 ms 100 ms 10 ms Enabled
The gain setting is pre­configured to one of the following options.
High excess gain is not available for 3­ or 5­millisecond response speeds.
Configuration Description
Chapter 2
TEACH Mode
2.1
Response Speed
2.2
Gain and Sensitivity
2.3
© Banner Engineering Corp.