manualshive.com logo in svg

Banner PICO-AMP MD14BB6, Руководство пользователя

Поделиться
Скачать
Banner PICO-AMP MD14BB6 Скачать руководство пользователя страница 7

PICO-AMP Miniature Remote Sensing System

SP3/SP8 Remote Sensor Hookups

Mounting the Sensors

Opposed-mode sensors are shipped in connected pairs (one emitter and one
receiver), with a 6' cable attached; the cable comes split to 6"; it may be split further
as needed to allow sufficient sensor separation. 

The sensors may be through-mounted to a wall using the hardware included with the
sensors. Using the provided 8 mm long screws, SP3 sensors may mount to a
maximum wall thickness of 4.0 mm (0.16"); SP8 sensors may mount to a maximum
wall thickness of 3.2 mm (0.13"). If mounted to the threaded accessory mounting
bracket, only the screws need be used.

8 mm

Stainless Steel

Screws

Nut

Lock Washer

Washer

Max. Wall Thickness

3.2 mm (SP8) or
4.0 mm (SP3)

8 mm

Stainless Steel

Screws

SHIELD

WHITE

RED

SHIELD

To Emitter

From Receiver

MD14 Series Amplifier

Figure 3. Mounting the SP3/SP8 sensor to

a wall

Figure 4. Mounting the SP3/SP8 sensor to 

its accessory mounting bracket 
(see page 7)

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Содержание PICO-AMP MD14BB6









Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды